Dafra DNPB328 Kullanım Kılavuzu - Sayfa 4

Araçlar Dafra DNPB328 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dafra DNPB328 10 sayfaları. Rivnut tool
Ayrıca Dafra DNPB328 için: Kullanım Kılavuzu (10 sayfalar)

Sayfayı Yazdır

DNPB328 Operation Manual

STROKE SETTING

1) Tool stroke should be set according to the work piece where the rivnut is to be set. This

tool's stroke can be adjusted between 1mm and 7mm.

2) To set the stroke:

a) Push the sleeve (#56) to the tool mandrel side, as shown:

b) Adjust the tool stroke by turning the knurled wheel on the tool as shown:

The scales along with the stroke setting window are indications for stroke.

c) Replace the sleeve (#56) back to its initial position after setting the stroke.