Dafra DRPB48V Kullanım Kılavuzu - Sayfa 2

Araçlar Dafra DRPB48V için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dafra DRPB48V 13 sayfaları.

Sayfayı Yazdır
DRPB48V Operation Manual
It is
against injuries.
-
This tool should be used exclusively to apply blind rivets as prescribed under TOOL
CAPACITY. It cannot be used for other purposes, such as hammer, etc.
-
This tool should be always operated with compressed air supply within the air pressure
range 0,5Mpa ~ 0,7Mpa.
-
Always DISCONNECT the air supply from the tool before changing the tool parts, such as
nosepiece, etc.
-
DO NOT use the tool in the following environments:
-
fuel and combustion air
-
temperature rapidly rising
-
humidity, rain, water, storm or thunder & lightening
-
When the tool is suspended by the operation hook during use, be sure the tool will not fall.
-
When using the tool, always use protective goggles, protective gloves, safety helmet, and
other necessary protections. It is highly recommended for safety reasons.
-
Use only genuine spare parts for repairs.
-
All repair work must be carried out by skilled personnel, when in doubt, always return the
tool to the distributor.
TOOL CAPACITY
Sets blind rivets: 3.0mm/3.2mm – 4.0mm – 4.8mm/5.0mm in all materials.
Optional 2.4mm setup available.

TOOL SPECIFICATIONS

Air supply pressure:
Output traction power:
Stroke:
Net weight:
Read this manual carefully before use the tool!
IMPORTANT
to follow the safety instructions for adequate protection
0.5Mpa ~ 0.7Mpa
8,400 N ~ 11,760 N
0mm ~ 16mm
1.33 kgs