Dot Origin VTAP100 Kurulum Kılavuzu - Sayfa 4

Kontrol Ünitesi Dot Origin VTAP100 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dot Origin VTAP100 13 sayfaları. Desktop usb reader
Ayrıca Dot Origin VTAP100 için: Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (17 sayfalar)

Sayfayı Yazdır

Safety instructions

WARNING: INTENDED USE

The VTAP100 equipment is intended for use by suitably qualified integrators, who will integrate the

VTAP100-OEM (PCB) into their own hardware. Although an optional wallbox case can be supplied.

Components mounted on the VTAP100 PCB are not user-serviceable.

WARNING: ESD PRECAUTIONS

We recommend careful handling and storage of Electrostatic Sensitive Devices (ESDs) during

installation. The VTAP100-OEM (PCB) should always be protected by static shielding bags for

shipping or storage.

WARNING: POWER SUPPLY

Use only a MicroUSB to USB cable, or the optional captive USB cable, if any, to connect the

VTAP100-OEM PCB to a PC. (Never connect both at the same time).

Using other cables will invalidate EMC emissions and immunity certifications.

The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB.

WARNING: USER DESIGNED ENCLOSURES

It is the responsibility of the integrator to ensure that their enclosure design for the VTAP100 retains

compliance with EMC emissions and immunity standards.

Integrators are responsible for evaluating their own end product (including the VTAP100-OEM PCB)

and obtaining separate approvals for the markets in which it will be sold or used.

VTAP100-OEM V3A INSTALLATION GUIDE

PAGE II