Dafra RRT5212 Kullanım Talimatları

Perçin Aletleri Dafra RRT5212 için çevrimiçi göz atın veya pdf Kullanım Talimatları indirin. Dafra RRT5212 2 sayfaları.

Model: RRT5212

operating instructions

CAPACITY

Rivnuts: M5 - M6 - M8 - M10 - M12 - Standard

Rivstuds: M5 - M6 - M8 - Optional

Rivnuts: UNC - 10.24, 1/4.20, 5/16.18, 3/8.16 , 1/2.13 - Optional

Unscrew anvil and

locknut

IMPORTANT - MAINTENANCE TIP

APPLY GREASE TO THE LOAD TRANSFER THREAD.

THIS IS DONE BY WINDING THE TOOL APART, CLEANING AND

GREASING THE THREAD.

MAINTENANCE TIME APPROX 5 MINUTES.

Dafra Products - 1/7 Jarrah Drive Braeside, VIC, 3195

160mm

Pull mandrel to remove

from tool body.

IMPORTANT

ALWAYS TEST SET RIVNUTS INTO SCRAP MATERIAL.

ONLY A SMALL AMOUNT OF FORCE IS REQUIRED TO

SET THESE RIVNUTS.

UNNECESSARY OVER TIGHTENING MAY RESULT IN

DAMAGE TO THE TOOL MANDREL OR RIVNUT THREADS.

210mm

- WHEN USING M5 AND M6 RIVNUTS,

I dafra.com.au I 03 9555 6872