Dot-x DNR V SERIES Kullanıcı Kılavuzu - Sayfa 6

Uzaktan Kumanda Dot-x DNR V SERIES için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dot-x DNR V SERIES 12 sayfaları. 25 inch display
Ayrıca Dot-x DNR V SERIES için: Kullanıcı Kılavuzu (10 sayfalar)

Sayfayı Yazdır

SAFETY WARNINGS

antenna system, take extreme care to keep from touching such power

lines or circuits, as contact with them might be fatal.

17. Overloading

Do not overload wall outlets and extension cords, as this can result in risk

of fire or electric shock.

18. Objects and Liquid Entry

Never push objects of any kind into this product through openings, as

they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

19. Servicing

Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

20. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a. If the power supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen, into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions; improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore

the product to its normal operation.

e. If the product has been dropped or the cabinet has been damaged.

f. If the product exhibits a distinct change in performance.

21. Replacement Parts

When replacement parts are required, be sure the service technician has

used replacement parts specified by the manufacturer or that have the

same characteristics as the original part. Unauthorized substitution may

result in fire, electric shock, or other hazards.

22. Safety Check

Upon completion of any service or repairs to this product, ask the service

technician to perform safety checks to determine that the product is in

proper operating condition.

23. Wall or Ceiling Mount

Mount the product to a wall or ceiling only as recommended by the

manufacturer.

24. Heat

Keep the product away from heat sources such as radiators, heat regis-

ters, stoves, or other products (including amplifiers) that produce heat.

scan. In scan modes 1,3 the power On/Off could be changed with Start Ch

SM=1 Factory items and Start channel.

Scan Mode Characteristics

0 AUX, TV, VCR3, VCR4

1 AUX, TV, VCR3, VCR4, ON/OFF

17 TEXT MODE: Turns text mode on or off in the users menu. Range is 0-1.

Zero is off and one is on. In on mode, user can call up text mode. Set to 0

unless text is being used.

18 SLEEP TIMER: Enables sleep timer key. Range is 0-1. Zero is off and 1 is on.

19 ALARM: Enables Alarm Key. Range is 0-1. Zero is off and 1 is on.

20 CH OVER RIDE: Zero is off, one is on. In on mode, the display works

normally. This item is generally set to off so it can be controlled with entertain-

ment unit. In off mode, Auto Program and Channel Add/Delete do not function.

21 OLD OCV: (On Command Video) Not used.

22 CAPTION LOCK: Zero is off, 1 is on. Set to 1 for operation to restore

previous on/off state after display is initially turned on.

23 FUNCTION PRE: (Function Menu Channel Preview) Range is 0-1. Zero is

off and one is on. Set to 1 to suppress channel preview screen in the function

menu for some pay per view systems.

24 FEATURE LEVEL: Not used.

25 TRAP 3.58: Zero is off, one is on. Set to 1 for normal display operation. Set

to 0 if Y/C is used or chassis has a comb filter.

26 RF BAND PASS: Sets adjustment range of the customer control for bright-

ness in therefore mode. Range is 0-1. Set to 1.

27 RF BRT: (RF brightness) Sets adjustment range of customer control for

brightness in RF mode. Range is 0-63. A typical value is 30.

28 AUX BRT: (Auxiliary Brightness) Sets adjustment range of the customer

control for brightness in AUX mode. Range is 0-63. Typical value is 30.

29 MAX CONTRAST: Sets adjustment range of customer control for contrast.

Range is 0-63. Typical value is 63.

30 VERT SIZE: (Vertical Size) Range is 0-254.

31 HORZ SIZE: (Horizontal Size) Range is 0-254.

32 VERT PHASE: (Vertical Phase) Range is 0-7.

33 HORZ PHASE: (Horizontal Phase) Range is from 0-31.

34 AUDIO LEVEL: Sound Attenuation range is 0-63.

2 AUX, TV, VCR3, VCR4, FM

3 AUX, TV, VCR3, VCR4, FM, ON/OFF