Asus VivoMini UN45 Kullanıcı Kılavuzu - Sayfa 18

Masaüstü Asus VivoMini UN45 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Asus VivoMini UN45 40 sayfaları.
Ayrıca Asus VivoMini UN45 için: Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Turning off your VivoMini

If your VivoMini is unresponsive, press and hold the power button

for at least four (4) seconds until your VivoMini turns off.

Putting your VivoMini to sleep

To put your VivoMini on Sleep mode, press the Power button once.

Entering the BIOS Setup

BIOS (Basic Input and Output System) stores system hardware

settings that are needed for system startup in the VivoMini.

In normal circumstances, the default BIOS settings apply to most

conditions to ensure optimal performance. Do not change the

default BIOS settings except in the following circumstances:

• An error message appears on the screen during the system

bootup and requests you to run the BIOS Setup.

• You have installed a new system component that requires further

BIOS settings or update.

WARNING! Inappropriate BIOS settings may result to instability

or boot failure. We strongly recommend that you change the BIOS

settings only with the help of a trained service personnel.

Quickly enter the BIOS

To quickly enter the BIOS:

• Press the power button for at least four (4) seconds to shut down

your VivoMini, then press the power button again to turn your

VivoMini back on, then press <F2> or <Del> during POST.

• When your VivoMini is off, disconnect the power cord from your

VivoMini's power connector. Reconnect the power cable and

press the power button to turn on your VivoMini. Press <F2> or

<Del> during POST.

NOTE: POST (Power-On Self Test) is a series of software controlled

diagnostic tests that run when you turn on your PC.