DAGE-MTI DC-200 Kullanıcı Kılavuzu - Sayfa 5
Güvenlik Kamerası DAGE-MTI DC-200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAGE-MTI DC-200 17 sayfaları. Color
Sayfayı YazdırPower
The red LED located on the camera front lights when
power is supplied to the camera. The camera requires
approximately 200mA at 12VDC. The external power
supply, Dage P/N 738044-02, provides the correct power to
the camera.
Video
The Video BNC connector provides a NTSC (or PAL)
composite video signal to be terminated into 75 Ω. For
improved video performance, the Y/C video output signal
should be used when possible.
Y/C
The Y/C or sometimes referred to as "S Video" connector
provides Y (luminance) and C (color) signals to be
terminated into 75Ω. Because the signals are separate and
not combined like the composite output is, a higher quality
image can be obtained.
OSD Keyboard
The OSD Keyboard connector is used with the OSD
Remote to adjust camera functions such as white balance,
shutter, gain, back light compensation, and the eight character
camera title. The keyboard settings are stored in memory, so
it is only necessary to attach the remote when it is desired to
change settings. The camera Power should be removed
when connecting and disconnecting the remote.