Advance Tabco DI-3-10-EC Manuel - Sayfa 2

Sıhhi Tesisat Ürünleri Advance Tabco DI-3-10-EC için çevrimiçi göz atın veya pdf Manuel indirin. Advance Tabco DI-3-10-EC 4 sayfaları. Drop-in sinks

Contents:

(1) Drop-In Sink

(1) Gooseneck 4" O.C. Deck Mount Faucet

(1 OR 2) K-6 Basket Drain(s)

(4) Under-Counter Mounting Brackets

(4) Nuts

Tools Required:

• Ruler or Tape Measure

• Pencil

• Saber Saw or Jig Saw

• 1/4" and 3/8" Drill Bit

• Adjustable Wrench

STEP 1

• Remove all contents from carton. (NOTE: Check for concealed

damage - Notify Carrier of any damages immediately)

STEP 2

• Cut opening at desired location on countertop (See Chart on Back

Page). NOTE: Cut 1" radius at four intersecting corners.

• Place Drop-In Sink into opening. Mark

location of four threaded studs at each

corner (Figure 1). Remove Drop-In Sink

and drill four 3/8" diameter holes.

See Back Page For Cut-Out Chart

• NOTE: BEFORE CUTTING COUNTER

TOP, VERIFY CUTOUT DIMENSIONS!

REMEMBER: MEASURE TWICE,

CUT ONCE!

Material Required:

• Silicone Sealant

• Plumbing Putty

Recommended Safety

Materials:

• Safety Glasses

• Work Gloves

Figure 1