Asus ROG SWIFT PG48UQ Kullanıcı Kılavuzu - Sayfa 19

Monitör Asus ROG SWIFT PG48UQ için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Asus ROG SWIFT PG48UQ 33 sayfaları.

•

To use the USB 3.0 ports: Take the supplied USB 3.0 cable, and plug

the smaller end (type B) of the USB upstream cable to the monitor's

USB upstream port, and the larger end (type A) to your computer's

USB 3.0 port. Make sure your computer is installed with the latest

Windows 10/Windows 11 operating system. That will enable the USB

ports on the monitor to work.

To use the 3.0 port for firmware upgrade: Save the new firmware to

•

the disk drive. Then plug the disk drive to the monitor's upstream port.

Follow the on-screen instructions to upgrade the firmware.

2.5 Turning On the Monitor

You can either press the

on the monitor to turn on the monitor.

If the Power Indicator function is enabled and an input source is detected,

the power LED will light up red to indicate that the monitor is turned on.

The power LED will not light up in Power Saving mode.

ASUS LCD Monitor PG48UQ Series

button on the remote control or the

button

2-5