DOTWORKZ COOLDOME ST-CD-24V Kurulum Kılavuzu - Sayfa 3

Kamera Aksesuarları DOTWORKZ COOLDOME ST-CD-24V için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DOTWORKZ COOLDOME ST-CD-24V 17 sayfaları. S-type cooldome enclosure

Sayfayı Yazdır
PRECAUTIONS – WARNINGS – ADDITIONAL INFORMATION
IMPORTANT SAFEGUARDS
Read Instructions - All the safety and operating instructions should be read
1
before the unit is operated.
2
Retain Instructions - The safety and operating instructions should be retained for
future reference.
3. Heed Warnings - All warnings on the unit and in the operating instructions
should be adhered to.
4. Follow Instructions - All operating & user instructions should be followed.
5. Electrical Connections - Only a qualified electrician should make electrical
connections.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Cable Runs - All cable runs must be within permissible distance.
8. Mounting -This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the unit accordingly:
a. Installation should be made by a qualified installer.
b. Installation should be in compliance with local codes.
c.
Care should be exercised to select suitable hardware to install the unit,
taking into account both the composition of the mounting surface and
the weight of the unit. Be sure to periodically examine the unit and the
supporting structure to make sure that the integrity of the
installation is intact. Failure to comply with the foregoing could
result in the unit separating from the support structure and falling, with
resultant damages or injury to anyone or anything struck by the failing
unit.
UNPACKING
Unpack carefully. Electronic components can be damaged if improperly handled
or dropped. If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper. Be sure to save:
1. The shipping carton and packaging material. They are the safest material in
which to make future shipments of the equipment.
2. These Installation and Operating Instructions.
For technical questions or product returns – call Dotworkz Customer Service (866-575-4689) 7:30 AM to 4:30 PM (PST). The proper
technician will contact you as soon as possible.
The External Nut on All electrical wire feed Glands must be tightened to create a weather tight seal prior to putting S-TYPE in
service. Failure to create this seal may result in water incursion into enclosure. This may lead to electrical shock, product failure and
damage to electrical systems installed within enclosure, including but not limited to damage to camera, heater and blower circuitry,
cooling circuitry and other systems installed in unit.
All screws on hinged lower must be tightened to create seal on enclosure. Failure to create this seal may result in water incursion into
enclosure. This may lead to electrical shock, failure and damage to electrical systems installed within enclosure, including but not limited
to damage to camera, heater and blower circuitry, cooling circuitry and other systems installed in unit.
Do not over tighten any Screws, Stand Offs, or other fasteners on this unit. Failure to heed this warning will cause damage or failure of
the S-TYPE enclosure.
PRODUCT INSTALLATION
(RETAIN THIS DOCUMENT)
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE
SERVICE
If the unit ever needs repair service, customer should contact Dotworkz Systems
(619) 224-LIVE (5483)
COMPONENTS TO WATER OR MOISTURE
The lightning flash with an arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of non-insulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance
for return authorization & shipping instructions.
+1