Advance Tabco SS Series Kurulum Talimatları

Masaüstü Advance Tabco SS Series için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Advance Tabco SS Series 2 sayfaları. Drawers

TA-90 Drawer Adapter

Contents:

(2) Drawer Angles

(4) Self Tapping Screws

Required Tools:

Drill Motor

1/8" Drill Bit

Open End Wrench or Socket

Step 1:

Turn table upside down.

Step 2:

Position drawer angles 21 5/8" O.D. apart, Drawer angle slotted hole

to be located 5" from front edge of table. (Illustration 1) mark holes.

21 5/8"

O.D.

Illustration 1

Step 3:

Drill 1/8" holes at four locations and use self tapping screws

provided to mount angle. (Illustration 2)

Illustration 2

Step 4:

Refer to mounting procedure for the appropriate drawer.

(see inner page)

Edgewood, New York 11717

Installation Instructions

for Drawers

CHECK FOR CONCEALED DAMAGE

FILE CLAIM WITH DELIVERING FREIGHT CARRIER

Drawers manufactured by ADVANCE TABCO are designed and

constructed for storage. Applications may include storage of

flatware, small utensils, etc. ADVANCE TABCO does not

recommend product use for activities employing harsh and active

chemicals. Please consult factory regarding unusual applications.

DRW-3/00