Doug Fleenor Design RERUN-R2 Kullanıcı El Kitabı - Sayfa 3
Kayıt Ekipmanları Doug Fleenor Design RERUN-R2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Doug Fleenor Design RERUN-R2 12 sayfaları. Rackmount dmx512 recorder
Sayfayı Yazdır
SPECIFICATIONS
DMX connectors:
Input Circuit:
Output Circuit:
Isolation:
Expansion circuit:
Indicators:
User controls:
Power input:
Color:
Size :
Gold plated 5 pin Neutrik D-1 Series XLR connectors or optional terminal blocks
EIA-485 receiver (LT1785) with 120 ohm termination resistor between + Data &
- Data
ESD protected EIA-485 transceiver (LT1785)
None. DMX input(s) not isolated from DMX output(s).
Gold plated 3 pin female Neutrik D-1 Series XLR connector or optional terminal
block
2
I C (Inter-Integrated Circuit) Bus
Ten green SHOW LEDs
One green PAUSE LED
One green LOOP LED
One yellow START LED
One yellow END LED
Up to four red INPUT/RECORD LEDs (One per universe)
Ten [SHOW] buttons
One [PAUSE] button
One [LOOP] button
One [REWIND] button
One [FORWARD] button
One [RECORD] button
Attached universal power supply 100 - 240VAC, 50/60 hertz, 5 watts
Top, bottom and sides: Silver hammer tone
Front and back: Black
1.7"H x 6.5"D x 16"W
Page 3 of 12