Doug Fleenor Design DMX512 Kullanıcı El Kitabı - Sayfa 6

Medya Dönüştürücü Doug Fleenor Design DMX512 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Doug Fleenor Design DMX512 6 sayfaları. Dmx512 to 0-10 volt analog converter

Sayfayı Yazdır

(an AD558). The micro-controller sequentially applies the levels for each output to the

Digital to Analog chip (abbreviated D/A) while switching the output of the D/A to the 24

output buffers. The switching circuit (three 4051 chips) allow one D/A to service all

outputs with less than 1/250 second delay between the time a DMX level changes and

the analog output is updated. Capacitors hold the 0 - 10 volt level while the other

outputs are being updated.

Diodes on the output allow multiple consoles to control the same dimmers by what is

commonly known as Pile-On of the signal.

We cannot answer all the questions everyone might have about our products here. If

you have any questions, please call. We like to talk with our customers.

ABOUT THE COMPANY

Doug Fleenor Design is a semi-custom design and manufacturing company. Our

current standard products include converters for many lighting control protocols, Optical

Isolation products for DMX512, AMX192, and other digital protocols, and a Digital

Multiplex Combine Unit (for combining Digital Multiplex signals in a pile-on, route, or

patch operation). All these standard products can be customized for particular needs.

Doug Fleenor, Principle Engineer, has been designing for the entertainment industry

since 1979. He spent the years from 1984 through 1990 as Teatronics' Chief Engineer.

During this time his work on advancing multiplex control consoles, dimmers and

systems earned him the nick-name "Doctor Mux". Doug Fleenor Design continues to

provide solutions to multiplex control problems as well as designing custom and semi-

custom control and dimming systems.

WARRANTY

Products manufactured by Doug Fleenor Design carry a five year warranty. If the

product breaks due to a manufacturing defect, within five years of manufacture, Doug

Fleenor Design will repair it. It is the customer's responsibility to return the product to

Doug Fleenor Design (at the customer's expense). Doug Fleenor Design will repair the

unit and return it to the customer (at Doug Fleenor Design's expense). If a trip is

necessary to the customer's site to solve a problem, the expenses of the trip must be

paid by the customer.

If your unit is out of warranty, please call us anyway. We try to be fair on all repairs. If

the failure was our fault, we will usually repair it at no charge regardless of the time

period! We want you to be happy with your purchase.