Dahua A83ABBZ Hızlı Başlangıç Kılavuzu - Sayfa 10

Güvenlik Kamerası Dahua A83ABBZ için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dahua A83ABBZ 16 sayfaları. 4k hdcvi vari-focal

1. Remove the camera, the mounting template, and the hardware package from the box.

2. Apply the mounting template to the mounting medium. Ensure the TOP of the template is directed

to the desired direction.

3. Pre-drill the four (4) perimeter holes for the expansion bolts, using a drill bit that is no wider than

the expansion bolt, according to the position on the mounting template.

4. Drill the cable outlet hole to route the cable from the camera through the installation medium.

5. Insert an expansion bolt into each pre-drilled perimeter hole.

6. Align the TOP of the camera body with the TOP of the mounting template.

7. Route the cables from the camera through the installation medium.

8. Align the four (4) holes on the camera body with the expansion bolts.

9. Insert a self-tapping screw into each hole on the camera body and then into an expansion bolt.

Secure the body to the medium with a Philips-head screwdriver.

10. Connect the video output ports to the associated output device (monitor, DVR) and connect the

power cable to a 12 VDC power supply.

11. Use the Hex Wrench to loosen the adjusting screws on the base of the camera and on the

camera arm.

12. Rotate the camera arm, tilt the camera module, and rotate the base to achieve the desired

viewing angle.

Figure 4-2

Available from A1 Security Cameras