dough Xpress DM-18 Kullanıcı El Kitabı - Sayfa 14

Ticari Gıda Ekipmanları dough Xpress DM-18 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. dough Xpress DM-18 16 sayfaları. Manual dough press

Sayfayı Yazdır

TROUBLESHOOTING

Yes

Take an Ohm meter and verify

that the switch contacts are

opening and closing when the

switch lever is depressed.

Are they opening/closing?

Yes

Replace the

Temp/Time

Microswitch

Controller

Problem

Solved

With no dough in the machine, adjust the thickness

adjustment so that with the handle closed the platens

are just touching each other. Does the alignment

between he upper and lower platens look even?

Take a folded rag or towel and place between he upper

and lower platens where they are touching each

other first. Lower the upper platen and apply some

handle pressure to attempt to bend the platens back

into alignment. Remove the towel, close the handle

and see if the alignment has improved. Repeat as

necessary until proper alignment is restored.

Timer Won't Count Down

Remove the rear cover. Does the

lower microswitch "click" when

the machine handle is closed?

Press is not Pressing Dough Evenly

Are you pressing the dough in the

Yes

area(s) as outlined in the owners' manual?

Problem

Solved

Check the adjustment of the

switch so you can hear the

switch "click" when the

machine is closed.

Problem

Solved

Review the instructions on

how to properly press dough

in the owners' manual for

your machine.

Problem

Solved