Baumer IO-Link RR30 Kullanım Kılavuzu - Sayfa 14

Aksesuarlar Baumer IO-Link RR30 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Baumer IO-Link RR30 40 sayfaları. Radar sensor

Hysteresis Alignment Mode

4.3.5

In case of axial detection tasks like stop trigger or level detection, an accurate switching is required.

To adapt the switching behavior and the hysteresis to the movement direction of the object, the alignment of

the hysteresis can be changed.

Parameter name

SSC1 Config.Hyst

4.3.5.1 Left Aligned

Left Aligned defines the hysteresis to be aligned towards the sensor / against the sensing direction.

When to apply?

For an accurate switching distance in case the object is moving away from the sensor

Example: Detection of the low level of a tank to avoid a dry-run

Figure 12 Left Aligned, Single Point Mode

4.3.5.2 Right Aligned

Right Aligned defines the hysteresis to be aligned away from the sensor / in sensing direction.

When to apply?

For an accurate switching distance in case the object is moving towards the sensor.

Example: Stop trigger application, usual detection tasks.

Figure 14 Right Aligned, Single Point Mode

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

Short Description

Selects the hysteresis alignment

mode

14/40

Rights

Unit / Allowed values

- Left Aligned

- Center Aligned

- Right Aligned (Default)

Figure 13 Left Aligned, Window Mode

Figure 15 Right Aligned, Window Mode

Baumer Electric AG

Frauenfeld, Switzerland