Dahua DH-ITC231 Kurulum Kılavuzu - Sayfa 5

Güvenlik Kamerası Dahua DH-ITC231 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dahua DH-ITC231 20 sayfaları. Camera anpr system

Chapter 1 Introduction

To instruct the engineering and technical personnel, engineering refer to standard construction,

device installation to meet regulatory requirements, to ensure construction quality.

The instructions apply to model for the installation guide DH-ITC231 HD ANPR camera.

Products Division, regional technicians, installation personnel, and customers are not included.

This system is composed of front-end subsystem and rear-end platform software. Front-end subsystem

mainly snapshot plate, analyze plate info, analyze vehicle behavior, store snapshot and etc. Platform

software mainly stores picture, count vehicle flow (statistics), arm and etc.

This installation guide is for front-end subsystem, so only introduce you to installation and debugging of

the subsystem.

Front-end subsystem is composed of picture snapshot module（HD camera and HD lens）, vehicle

detection module（radar）, strobe light module（LED fill light）, picture backlight module（exposure light）,

data storage module（ITC terminal management device）.

DH-ITC231 camera G-CMOS is 2.0 MP, so 1 channel is recommended, see chart below：

No.

Device

All-in-one snapshot

unit

Cardan joint

bracket

ITC MINI terminal

management

device

Model

Quanti

ITC231-RU1A-IRL

8018

ITSE0804-GN5B-D

All-in-one device can configure (optional

built-in light-L, heat unit-H, heat and built-in

light-HL); after you select all-in-one device,

you do not need to select separate camera

and housing

Optional

Note