dough Xpress DXP-CRS Kullanıcı El Kitabı - Sayfa 8
Endüstriyel Ekipmanlar dough Xpress DXP-CRS için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. dough Xpress DXP-CRS 12 sayfaları. Reversible sheeters
Sayfayı Yazdır
3. MOUNTING OF MACHINE
3-1. HOW TO MOUNT THE MACHINE
The machine must be installed on a horizontally-level floor. It should be pleased
in a location that is convenient for both operation and maintenance. The machine
safety features make it possible to stand close to the machine during operation.
Choose a suitable place for installing the machine, observing the minimum distances
from the walls as shown in the figure at the side. These spaces are necessary
for cleaning and routine maintenance operations and also ensure safe operating
conditions without the danger of dragging in and /or crushing.
The room must be provided with adequate lighting and ventilation.
20"
3-2. CONNECTING OF POWER SOURCE
• Qualified personnel in accordance with applicable codes and regulations
should make electrical connections.
• The machine is provided with one single electrical connection with connec-
tion cable at the rear.
• Check that the rating plate voltage corresponds to the mains voltage.
• The machine must be connected to a manual control voltage disconnection
device fitted in an easily accessible position so that the machine electrical
equipment can be separated from the mains when necessary.
• In particular, the system must be installed by a technically and profession-
ally qualified electrician listed in the appropriate register. The installer is
obliged to provide the customer with a declaration of conformity. Old sys-
tems should be checked in order to adapt them to the latest safety regula-
tions and state-of-the-art.
20"
8
20"