Dahua F Series Hızlı Başlangıç Kılavuzu - Sayfa 14

Dahua HD IR Vari-focal Dome Network Camera Quick Start Guide

Step 6

Take up the dome enclosure, put it back on the camera properly regarding to screw and hole, and

fasten the three inner hex screws with wrench. So far the installation is completed.

Note:

The dome enclosure is involved in device waterproof function; make sure it is firmly tightened after

adjustment.

Step 7

Waterproof connector installation for network port; see Figure 2-7 for more details.

1. Keep the convex groove outward and install the rubber ring into the network port, keep the smaller

hole of the rubber ring outward and install the fixing rubber ring into the main body of the

waterproof connector.

2. Pull the network cable without crystal head through main body of waterproof connector, fixing

rubber ring and waterproof locking cover, make the crystal head of network cable, and then insert it

into the network cable.

3. Put the main body of waterproof connector on the network port and rotate it clockwise to lock the

network port and waterproof connector firmly.

4. Put the waterproof locking cover on the main body of waterproof connector and rotate it clockwise

to lock the waterproof connector and waterproof locking cover firmly.

Figure 2-7