Dahua F Series Hızlı Başlangıç Kılavuzu - Sayfa 3

Sayfayı Yazdır

Dahua HD IR Vari-focal Dome Network Camera Quick Start Guide



Please do not dismantle the device; there is no component which can be fixed by users themselves

in the machine. It may cause water leakage or bad image for the device due to unprofessional

dismantling. Please contact after-sale service to replace desiccant if it becomes green.



It is recommended to use the device with thunder proof device in order to improve thunder proof

effect.



The grounding holes of the product are recommended to be grounded to further enhance the

reliability of the camera.



Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust

or dirt on the lens surface. Please use a dry cloth wetted by alcohol to wipe away the dust gently if

it is necessary to clean.



Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to

dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean

the device. Don't use volatile solvent like alcohol, benzene, thinner and etc or strong detergent with

abrasiveness, otherwise it will damage the surface coating or reduce the working performance of

the device.



Dome cover is an optical device, please don't touch or wipe cover surface directly during

installation and use, please refer to the following methods to deal with once dirt is found:



Stained with dirt



Use oil-free soft brush or hair dries to remove it gently.



Stained with grease or fingerprint



Use soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth or

paper soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to change

the cloth and wipe several times if it is not clean enough.

Warning



Please modify the default password after login in order to avoid being stolen.



Please use the standard accessories provided by manufacturer and make sure the device is

installed and fixed by professional engineers.



Please prevent the device surface from the radiation of laser beam when using laser beam device.



Please do not provide two or more power supply modes for the device, otherwise it may cause

damage to the device.

Statement



Please refer to the actual product for more details; the manual is just for reference.



The manual will be regularly upgraded according to the product update; the upgraded content will

be added in the manual without prior announcement.



Please contact the supplier or customer service if there is any problem occurred when using the

device.



Please contact the customer service for the latest procedure and supplementary documentation.