Asus AAM60BI Hızlı Kurulum Talimatları Kılavuzu - Sayfa 8

Ağ Yönlendiricisi Asus AAM60BI için çevrimiçi göz atın veya pdf Hızlı Kurulum Talimatları Kılavuzu indirin. Asus AAM60BI 30 sayfaları. Asus aam60ev; aam60bi; aam60vi adsl routers

Sayfayı Yazdır

You now need to enter the address for the DNS server from

your ISP. Please ask your ISP for the address of their DNS

(a list of ISP DSN addresses is given at the back of this

guide but it might not be up to date). Enter the DNS

address and then 'add' the address to the DNS list.

Finally click on OK and then OK from the main Network

menu.

Windows will now install the revised network settings;

please note that your original Windows installation CD

might be required. You should then reboot your PC.

That's all there is to the basic set-up. The next section

covers basic testing.

it might not be up to date). Enter the DNS address and then

'add' the address to the DNS list.

Finally click on OK, then OK and then Close. The new

TCP/IP settings should take immediate effect.,

That's all there is to the basic set-up. The next section

covers basic testing.

So now you should have the ethernet and ADSL settings correctly

configured on your router. If you altered the IP address settings of

the router then you may need to now go and change the TCP settings

of your computer (or LAN) to suite.

If you want to use the router via your LAN (i.e. not just connected to

a single computer) then you should now unplug the network cable

from your computer and connect it to an uplink port on your network

hub. If you did this with the router power still on then now press the

reset button on the router. Alternatively now reconnect the power to

the router.

4.1.2 Running your Browser

After checking your connections and TCP settings (see above) you

are ready to run your browser in order to configure the router.

Any browser can be used on any operating system: The

configuration screens are the same. If you are using Explorer then

click on your Explorer icon to start your browser.

When your browser starts up first check that it's using your LAN for

internet access. To do this in Explorer go to Tools/Internet

Options/Connections.

- 8 -