COM-power corporation FCLCE-452 Kullanım Kılavuzu - Sayfa 14
Ölçüm Cihazları COM-power corporation FCLCE-452 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. COM-power corporation FCLCE-452 19 sayfaları. Rf current probe, calibration fixture
Sayfayı Yazdır
Calibration fixtures provide a means by which current probes can be calibrated to
determine the insertion loss and transfer impedance factors for the probe. Fixtures are also
used when establishing or calibrating, drive levels for conducted susceptibility tests. These
applications are discussed in more detail in the following sections.
The FCLCE-452 Fixture is specifically designed for use with the CLCE-452.
The intent of the fixture is to maintain the coaxial structure of the transmission line, while
allowing the probe to be installed around the center conductor of the coaxial line.
Illustrated in Figure 8 is the procedure to be followed for installing the CLCE-452 BCI
Probe into the FCLCE-452 Calibration Fixture.
- C A L I B R A T I O N
S E C T I O N 4
Page 14 of 18
INSTRUCTION MANUAL
Rev090519