Electric Eel Z5-AF Operatör El Kitabı - Sayfa 9
Temizlik Ekipmanları Electric Eel Z5-AF için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Electric Eel Z5-AF 9 sayfaları. Drain cleaning machine
Ayrıca Electric Eel Z5-AF için: Müşteri Güvenliği ve Kullanım Kılavuzu (2 sayfalar)
Sayfayı Yazdır
NOTE: The speed at which the
cable is fed initially can be
controlled by moving the feeder
control lever toward FORWARD to
increase speed and moving back
toward NEUTRAL to slow speed.
NOTE: If the feeder control lever is
initially put in FORWARD but the
cable is not advancing, then turn
the cable tension knob in a
clockwise direction until the cable
begins to advance. DO NOT over-
tighten cable tension knob as it
may damage feeder bearings.
7. Continue to automatically feed
cable until obstruction is met.
When cable begins to drag or
rotation becomes difficult, move
the lever to the NEUTRAL
position and allow tool to cut
away at the obstruction.
DANGER: NEVER force the
cable or tool into the
obstruction. Choose the proper
feeding speed in order to give a
smooth cutting action.
8. If tool becomes hung up in the
obstruction, move control lever
to the REVERSE position to back
out tool.
9. After tool as been removed from
obstruction, move control lever
back to the FORWARD position
and continue to work through
obstruction.
10. To retrieve cable from line,
move control lever to the
REVERSE position (while
continuing to operate cage/drum
in forward rotation) and cable
will back out of line and feed into
cage/drum.
NOTE: It is recommended to
use a continuous flush of water
to clean tool, cable, and sewer
line as cable is retrieved.
11. When tool is close to cleanout
opening, return Control Lever to
NEUTRAL position, release foot
actuator, and allow machine to
come to a complete stop.
DISCONNECT POWER CORD.
12. Pull remaining cable and tool
from sewer line and hand-feed
cable back into machine.
9