Baumer 22106 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 28

Medya Dönüştürücü Baumer 22106 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Baumer 22106 36 sayfaları. Sine encoder with support plate for a torque arm

Sayfayı Yazdır

Elektrischer Anschluss / Electrical connection

7.3

Sensorkabel HEK 8 (Zubehör)

Es wird empfohlen, das Baumer Hübner

Sensorkabel HEK 8 zu verwenden oder

ersatzweise ein geschirmtes, paarig ver-

seiltes Kabel. Das Kabel sollte in einem

Stück und getrennt von Motorkabeln ver-

legt werden.

Kabelabschluss:

rot/red = +UB

blau/blue =

weiß/white = K1 (A+)

braun/brown = K1 (A-)

grün/green = K2 (B+)

gelb/yellow = K2 (B-)

grau/grey = K0 (R+)

rosa/pink = K0 (R-)

schwarz/black = n.c.

violett/violet = n.c.



120 Ω

GND

7.3

Sensor cable HEK 8 (accessory)

Baumer Hübner sensor cable HEK 8 is

recommended. As a substitute a shielded

twisted pair cable should be used. Con-

tinuous wiring without any splices or cou-

plings should be used. Separate signal

cables from power cables.

Cable terminating resistance: 120 Ω

Aderendhülsen benutzen.

Use core-end ferrules.

Kabelschirm

Cable shield

Baumer_HOGS75-c_II_DE-EN (13A2)

MB175c - 11087595