Baumer GBUAS Manuel - Sayfa 6

Medya Dönüştürücü Baumer GBUAS için çevrimiçi göz atın veya pdf Manuel indirin. Baumer GBUAS 10 sayfaları. Absolute encoders with biss c interface

3 Introduction

This specification describes a serial interface protocol for isochronous, fast and safe exporting of sensor data

and simultaneous accessing of the slave registers.

In the point-to-point configuration, only one device with one slave (sensor) is operated on the master. The

BiSS interface is hardware-compatible to the SSI interface in the point-to-point configuration and only

requires two unidirectional differential lines.

Figure 1

Baumer_BiSS-C_MA_EN_V1 00.docx

6/10

www.baumer.com

25.08.2016