Baumer HMG 161 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 33
Medya Dönüştürücü Baumer HMG 161 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Baumer HMG 161 44 sayfaları. Absolute encoder
Sayfayı Yazdır
7.5
Hinweis für Ex-Schutz
Vor
der
Klemmenkastendeckel(s)
ob die Klemmenkastendeckeldich-
tung unbeschädigt ist.
7.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Motorkabeln ver-
legt werden.
Kabelabschluss:
1 ... 3 kΩ
blau/blue =
weiß/white = K1 (A+)
braun/brown = K1 (A-)
grün/green = K2 (B+)
gelb/yellow = K2 (B-)
grau/grey = Clock (Clock+)
rosa/pink = Clock (Clock-)
schwarz/black = Data (Data+)
violett/violet = Data (Data-)
MB115 - 11055726
Baumer_HMG161_II_DE-EN (13A1)
Montage
des/der
prüfen,
rot/red = +UB
GND
Elektrischer Anschluss / Electrical connection
7.5
Advice for Ex approval
Check that the seal of the terminal
box(es) is not damaged before
mounting the terminal box(es).
7.6
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Con-
tinuous wiring without any splices or cou-
plings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
1 ... 3 kΩ
Aderendhülsen benutzen
Use core-end ferrules
Kabelschirm
Cable shield
7
30