Baumer HS35 Series Kurulum ve Kullanım Talimatı - Sayfa 5
Medya Dönüştürücü Baumer HS35 Series için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatı indirin. Baumer HS35 Series 44 sayfaları.
Sayfayı Yazdır
1
Amendment History
Modification
Date
Version
2012-02-21
1.00
2012-10-15
2.00
2013-02-28
2.01
2013-06-19
2.02
2013-09-19
2.03
2013-11-04
2.04
2014-03-25
2.05
2014-09-19
2.06
2015-04-15
2.07
2016-03-31
2.08
2017-06-27
05
Baumer_HS35_II_DE-EN_1706.indd
Changed chapters
All
All
General safety instructions
Preparation /
Dimensions
Electrical Connection
Dimensions
Technical data - Electrical
data
Dimensions
Electrical Connection
Preparation /
Dimensions
Electrical Connection
Accessories
Preparation
Dimensions
Dimensions
Accessories
Dimensions
-
Description of the change
Initial document creation
Complete revised version
Supplementary text in Chapter 3.6 „Risk of
destruction due to electrostatic charge"
Drawing change in Chapter 4.3 „required
for electrical connection", in Chapter 7.1
„Dimension drawing"
Supplementary text in Chapter 10.3
„Terminal assignment HS35F & HS35P":
D31SR7 in MI07, D31SR10 in MI10
Supplementary text in Chapter 10.4
„Terminal assignment HS35S": D31SR10
in MI10
Drawing change in Chapter 7.1 „Dimensi-
on drawing"
Update in Chapter 7.2 „Tolerances", inch
hollow shaft diameters changed from
tolerance zone H8 in G7
Changing „HS35 - general parameters"
Drawing change in Chapter 7.1 „Dimen-
sion drawing": „LED for option EMS"
cancelled.
Changing of the terminal assignment
in Chapter 10.3 „Terminal assignment
HS35F & HS35P": „Pin E: Err (only EMS)"
in „Pin E: -"
Changing in Chapter 10.5 „Output signals
HS35F/P: Specification „EMS: LED status
/ error output" cancelled
Drawing change in Chapter 4.3 „required
for electrical connection"
Change in Chapter 10.3 & 10.4: Classifica-
tion of MIL-connectors omitted.
Change in Chapter 12 „Accessories":
Changing material numbers of NAC Mil
Spec Connector.
Reducer insert 15 mm added.
Drawing change in Chapter 7.1 „Dimen-
sion drawing": Reducer insert for ø15
added.
Changing in Chapter 7.2 „Tolerances":
ø15 added.
Changing in Chapter 12 „Accessoires":
11148651 - Reducer insert HS35 ø15 mm
added.
Changing in Chapter 7.2 „Tolerances":
0.394"/ø10 - tolerances adjusted.
Version harmonization on SAP/Print
Amendment History
Author
State
BTDE/rnik
Creation
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
BTDE/rnik
Changing
5