Baumer HUBNER BERLIN AMG 11 FSL Montaj ve Kullanım Talimatları - Sayfa 35
Medya Dönüştürücü Baumer HUBNER BERLIN AMG 11 FSL için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer HUBNER BERLIN AMG 11 FSL 44 sayfaları. Combination absolute encoder with integrated mechanical centrifugal switch
Sayfayı Yazdır
6.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder
ersatzweise ein geschirmtes, paarig ver-
seiltes Kabel. Das Kabel sollte in einem
Stück und getrennt von Stromkabeln ver-
legt werden.
Kabelabschluss:
1...3 kΩ
Blau/Blue =
Weiß/White = K1 (A+)
Braun/Brown = K1 (A-)
Grün/Green = K2 (B+)
Gelb/Yellow = K2 (B-)
Grau/Grey = Clock (Clock+)
Rosa/Pink = Clock (Clock-)
Schwarz/Black = Data (Data+)
Violett/Violet = Data (Data-)
MB086.1T1 - 11068255
Rot/Red = +UB
GND
Baumer_AMG11-FSL-T1_II_DE-EN (19A1)
Elektrischer Anschluss / Electrical connection
6.6
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is
recommended. As a substitute a shielded
twisted pair cable should be used. Con-
tinuous wiring without any splices or cou-
plings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
1...3 kΩ
Aderendhülsen benutzen
Use core-end ferrules
Kabelschirm
Cable shield
6
32