Baumer HUBNER BERLIN DeviceNet HMG 10 Montaj ve Kullanım Talimatları - Sayfa 22

Medya Dönüştürücü Baumer HUBNER BERLIN DeviceNet HMG 10 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer HUBNER BERLIN DeviceNet HMG 10 36 sayfaları. Absolute encoder with magnetic sensing

Sayfayı Yazdır
ELECTRICAL CONNECTION / SPEED SWITCH AND ADDITIONAL OUTPUT INCREMENTAL
5.2.4
Speed switch - Switching characteristics
Event
During initialisation
After initialisation and
speed ≤ -ns (off)
-ns (off) < speed ≤ -ns (on)
-ns (on) < speed < +ns (on)
+ns (on) ≤ speed < +ns (off)
+ns (off) ≤ speed
High resistance
Resistance between
SP+ and SP-
Low resistance
n
+ns (on) = Activation speed at shaft rotation in positive rotating direction*
+ns (off) = Deactivation speed at shaft rotation in positive rotating direction*
-ns (on) = Activation speed at shaft rotation in negative rotating direction*
-ns (off) = Deactivation at shaft rotation in negative rotating direction*
* See
section 6, page 22
19/33
-n
-ns (off)
= Speed
State of the speed switch output
High resistance (overspeed)
High resistance (overspeed)
State unchanged
Low resistance (no overspeed) after initialisation
if the encoder is rotating between the switching
range during initialisation�
Low resistance (no overspeed)
State unchanged
Low resistance (no overspeed) after initialisation
if the encoder is rotating between the switching
range during initialisation�
High resistance (overspeed)
-ns (on)
0
MB252EN - 11173969, 16A1, Baumer_HMG10-DeviceNet_II_EN
+ns (on)
+ns (off)
+n