Baumer HUBNER BERLIN HOG 11 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 7

Medya Dönüştürücü Baumer HUBNER BERLIN HOG 11 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Baumer HUBNER BERLIN HOG 11 32 sayfaları. Incremental encoder (twin encoder) with radial terminal box
Ayrıca Baumer HUBNER BERLIN HOG 11 için: Montaj ve Kullanım Talimatları (32 sayfalar), Montaj ve Kullanım Talimatları (40 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (40 sayfalar), Montaj ve Kullanım Talimatları (40 sayfalar)

Security indications

2.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts.

• Before all work switch off all operating voltages and ensure machinery is stationary.

2.2

Risk of destruction due to electrostatic charge

Electronic parts contained in the encoder are sensitive to high voltages.

• Do not touch plug contacts or electronic components.

• Protect output terminals against external voltages.

• Do not exceed max. operating voltage.

2.3

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces.

• Never restrict the freedom of movement of the encoder. The installation instructions must be

followed.

• It is essential that the specified clearances and/or angles are observed.

2.4

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the optical sensing system.

• Never use force. Assembly is simple when correct procedure is followed.

• Use suitable puller for disassembly.

2.5

Risk of destruction due to contamination

Dirt penetrating inside the encoder can cause short circuits and damage the optical sensing sys-

tem.

• Absolute cleanliness must be maintained when carrying out any work on the open terminal box.

• When dismantling, never allow lubricants to penetrate the encoder.

2.6

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the optical sensing system and the bearings. Dismounting an en-

coder, secured to a shaft by adhesive may lead to the destruction of the unit.

2.7

Explosion risk

Do not use the encoder in areas with explosive and/or highly inflammable materials. They may

explode and/or catch fire by possible spark formation.

MB072c - 11141929

Baumer_HOG11-DNV_II_DE-EN (16A2)

Security indications

