Asus WL520GC - Wireless Router Kullanıcı Kılavuzu - Sayfa 6

Ağ Yönlendiricisi Asus WL520GC - Wireless Router için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Asus WL520GC - Wireless Router 31 sayfaları. Broad range wireless family router
Ayrıca Asus WL520GC - Wireless Router için: Kullanıcı Kılavuzu (49 sayfalar), Hızlı Başlangıç Kılavuzu (30 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

Sayfayı Yazdır

Asus WL520GC - Wireless Router Kullanıcı Kılavuzu

3. Conﬁguring the Wireless Router

Note: 1) Before you start, we recommend using a wired connection for initial

configuration, which will avoid possible setup problem due to wireless

uncertainty.

2) ASUS also provides an EZSetup button for fast wireless

conﬁguration. If you prefer EZSetup to arrange for your wireless network

conﬁguration, please refer to chapter 6 for more information.

The ASUS Wireless Router can be configured to meet various usage scenarios.

Some of the factory default settings may suit your usage; however, others may need

changing. Prior to using the ASUS Wireless Router, you must check the basic settings

to guarantee it will work in your environment. Conﬁguring the ASUS Wireless Router

is done through a web browser. You need a Notebook PC or desktop PC connected

to the ASUS Wireless Router (either directly or through a hub) and running a web

browser as a conﬁguration terminal. The connection can be wired or wireless. For

the wireless connection, you need an IEEE 802.11g/b compatible device, e.g. ASUS

WLAN Card, installed in your Notebook PC. You should also disable WEP and set

the SSID to "default" for your wireless LAN device. If you want to conﬁgure the ASUS

Wireless Router or want to access the Internet through the ASUS Wireless Router,

TCP/IP settings must be correct. Normally, the TCP/IP setting should be on the IP

subnet of the ASUS Wireless Router.

Note: Before rebooting your computer, the ASUS Wireless Router should be

switched ON and in ready state.

1) ASUS Wireless Router Wired Connection

One RJ-45 cable is supplied with the ASUS Wireless Router. Auto crossover function is

designed into the ASUS Wireless Router so you can use either straight-through or crossover

Ethernet cable. Plug one end of the cable into the WAN port on the rear of the ASUS

Wireless Router and the other end into the Ethernet port of your ADSL or Cable modem.

Wireless-Connection

Note: If conﬁguration is done via wired connection, ignore this.

Refer to your wireless adapter userʼs manual on associating with the ASUS Wireless

Router. The default SSID of the ASUS Wireless Router is "default" (lower case),

encryption is disabled and open system

authentication is used.

2) Setting IP address for Wired or

Wireless Connection

Get IP Automatically

The ASUS Wireless Router incorporates a

DHCP server so the easiest method is to set

your PC to get its IP address automatically and

reboot your computer. So the correct IP address,

gateway, DNS (Domain Name System Server)

can be obtained from the ASUS Wireless Router.

WL-520g Wireless Router User Manual