Baumer Hubner Berlin microGen PMG10 Kullanım Kılavuzu - Sayfa 28

Medya Dönüştürücü Baumer Hubner Berlin microGen PMG10 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Baumer Hubner Berlin microGen PMG10 44 sayfaları. Absolute encoder
Ayrıca Baumer Hubner Berlin microGen PMG10 için: Kullanım Kılavuzu (40 sayfalar), Kullanım Kılavuzu (40 sayfalar)

Sayfayı Yazdır
6
|
Electrical installation
6.2.2

Output signals additional incremental output (optional)

At positive rotating direction
A+
A-
B+
B-
R+
Zero pulse+
R-
Zero pulse-
Ill. 14: Output signals with positive direction of rotation (zero pulse R+ and R- are only available at addi-
tional output II)
6.2.3

Switching level additional output incremental (optional)

Switching level
High/Low
Transmission length
Output frequency
I
The TTL/HTL output (Vin = Vout) at the additional output II incremental is galvanically iso-
lated and requires a separate voltage supply.
Tab. 1: Switching level additional output incremental (optional)
6.2.4

Programming interface (only for programmable variant)

Encoder parameters such as additional output, switch-off and switch-on speeds or also the
switching hysteresis can be changed and read out via connection SA and SB. The Z-PA.SDL1
WLAN adapter can be used for encoder access via web browser.
Also see about this
2 Z-PA.SDL.1 WLAN adapter: Programming device for HMG10P/PMG10P [} 32]
6.2.5

LED activity indicator

LED
INC1
INC2 (additional output incre-
mental
Status
Speed
Tab. 2: LED activity indicator
28
90°
TTL/RS422
≥ 2,5 V / ≤ 0,5 V
≤ 550 m bei 100 kHz
≤ 600 kHz
red
No function
Undervoltage
n
Overload
n
Excess temperature
n
Internal error
Speed higher than switching
speed (overspeed)
Operating Manual
Baumer Hübner
TTL/HTL (Vin = Vout)
≥ 2,5 V / ≤ 0,5 V (TTL)
n
≥ Ub − 3 V / ≤ 1,5 V (HTL)
n
≤ 550 m bei 100 kHz (TTL)
n
≤ 350 m bei 100 kHz (HTL)
n
≤ 600 kHz (TTL)
n
≤ 350 kHz (HTL)
n
green
No function
OK
OK
Speed below switching speed
PMG10 & PMG10P DeviceNet | V1
I