Baumer Hubner Berlin PMG 10 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 34
Medya Dönüştürücü Baumer Hubner Berlin PMG 10 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Baumer Hubner Berlin PMG 10 48 sayfaları. Absolute encoder with magnetic sensing
Ayrıca Baumer Hubner Berlin PMG 10 için: Kurulum ve Kullanım Talimatları Kılavuzu (36 sayfalar)
Sayfayı Yazdır
MOUNTING / MOUNTING THE SPRING DISK COUPLING TO THE ENCODER
4.
MOUNTING
4.1
Mounting the spring disk coupling to the encoder
We recommend using the Baumer Hübner spring disk coupling K 35, see
9, available as accessory� When other couplings are used pay attention to manufactu-
rer's notes�
4.2
Mounting to drive shaft
)
Lifetime restrictions and angle error by radial deviations
High runout of the drive shaft can cause encoder angle error�
High runout of the drive shaft can cause vibrations, which can shorten the lifetime of
the encoder�
» Lubricate drive shaft!
» Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The encoder must be mounted with cable connection facing downward and not
exposed to water�
7/21
2�5 mm
8
M
= 100 Ncm
t
7
10 mm
6
MB255EN - 11173976, 16A1, Baumer_PMG10-EtherCAT_II_EN
section 4.4, page