Douglas Dynamics 77800-1 Kurulum Talimatları Kılavuzu - Sayfa 7

Otomobil Aksesuarları Douglas Dynamics 77800-1 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Douglas Dynamics 77800-1 14 sayfaları. Light truck snowplow

Sayfayı Yazdır

4. Move the snowplow into an upright operating

position.

5. Reinstall the trip springs.

6. Adjust the trip springs by tightening the top nuts

until the coils of the springs begin to separate

(a piece of paper, such as this instruction sheet,

should pass between the second and third coils).

Remove the protective packaging from the angle

rams.

8. Align the holes in the rod end of the angle ram

with the corresponding holes on the back of the

quadrant.

9. Install a 1/2" x 3‑11/16" clevis pin from the top

down to attach each rod. Secure the clevis pins

with 5/32" x 1‑1/2" cotter pins from the parts bag.

Lit. No. 52524, Rev. 05

INSTALLATION INSTRUCTIONS

FINAL BLADE ASSEMBLY

1. Install a blade guide on each end of the blade as

shown.

5/16" x 1" Cap Screws

2. Install the supplied 1/2" x 1‑3/4" carriage bolts

and 1/2" locknuts in the two cutting edge holes

previously used for securing the blade to the

pallet.

Blade Guide

5/16" Locknuts

July 15, 2020