Baumer Hubner HOG 11 + FSL Montaj ve Kullanım Talimatları - Sayfa 5
Medya Dönüştürücü Baumer Hubner HOG 11 + FSL için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer Hubner HOG 11 + FSL 40 sayfaları. Incremental encoder with integrated mechanical centrifugal switch
Sayfayı Yazdır
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The combination HOG 11 + FSL is an opto electro nic precision measurement device and a
mechanically operated switching device which must be handled with care by skilled person-
nel only.
1.3
The constructive design of the centrifugal switch is its use as a switch with positive break func-
tion. It must not be used as a continuous switch (switching cycles greater than 500 during
service life).
1.4
The expected service life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.5
The storage temperature range of the device is between -15 °C and +70 °C.
1.6
The operating temperature range of the device is between -40 °C and +100 °C
(>3072 pulses per revolution: -25...+100 °C, option heating: -50...+100 °C),
measured at the housing.
1.7
EU Declaration of Conformity meeting to the European Directives.
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
Maintenance work is not necessary. The device may be only opened as described in this
instruction. Repair work that requires opening the device completely must be carried out by the
manufacturer. Alterations of the device are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
MB072.1T2 - 11070663
on the device invalidates warranty.
Baumer_HOG11-FSL-T2_II_DE-EN (20A1)
1
General notes
2