Baumer Hubner PMG10 Montaj ve Kullanım Talimatları - Sayfa 12
Medya Dönüştürücü Baumer Hubner PMG10 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları indirin. Baumer Hubner PMG10 36 sayfaları. Absolute encoder ssi with magnetic sensing
Sayfayı Yazdır
MOUNTING / MOUNTING WITH HOUSING FOOT B3
4.2
Mounting with housing foot B3
4.2.1
Mounting the spring disk coupling to the device
We recommend using the Baumer Hübner spring disk coupling K 35, see
page
11, available as accessory� When other couplings are used pay attention to
manufacturer's notes�
7
M
= 1 Nm
t
4.2.2
Mounting to drive shaft
)
Service life restrictions and angle error by runouts
High runout of the drive shaft can cause device angle error�
High runout of the drive shaft can cause vibrations, which can shorten the ser-
vice life of the device�
» Lubricate drive shaft!
» Minimize drive shaft runout (≤0.2 mm; ≤0.03 mm recommended).
i
The device must be mounted with cable connection facing downward and not
exposed to water�
9/29
2�5 mm
MB245EN - 11171693, 19A3, Baumer_PMG10-SSI_II_EN
section 4.3,