Acer Veriton M6620G Kullanıcı Kılavuzu - Sayfa 18

Masaüstü Acer Veriton M6620G için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer Veriton M6620G 38 sayfaları. Generic user guide

Connecting the power cable

Caution: Before you proceed, check the voltage range in your area.

Make sure that it matches your computer's voltage setting. If they

don't match, change your computer's voltage setting according to

your area's voltage range.

Set the voltage selector switch to the voltage range applicable to your area. Plug

the power cable into the power cable socket located on the rear panel of your

computer. Then plug the other end of the power cable into a power outlet.

After connecting the necessary peripherals and plugging in the power cable, you

are now ready to turn the computer on and get to work.

To turn on your computer:

Turn on all peripherals connected to your computer, such as the monitor,

printer, speakers, etc.

On the front panel of your computer, press the power button.

Important: Make sure that the power cable is properly plugged into

an electrical outlet. If you are using a power strip or an AVR (Auto-

Voltage Regulator), make sure that it is plugged in and turned on.

If you cannot shut down your computer normally, press and hold the power button

for at least four seconds. Quickly pressing the button may put the computer in

suspend mode only.

2 Setting up your computer