Baumer GCA5 C8 Manuel - Sayfa 5

Ölçüm Cihazları Baumer GCA5 C8 için çevrimiçi göz atın veya pdf Manuel indirin. Baumer GCA5 C8 16 sayfaları. Cable transducer gca5 with canopen

2 Safety and operating instructions

Intended use



The cable transducer is a precision measuring device that is used to record positions and speeds. It provides

measuring values as electronic output signals for the subsequently connected device. It must not be used for any

other purpose. Unless this product is specially labeled, it may not be used for operation in potentially explosive

environments.



Make sure by appropriate safety measures, that in case of error or failure of the cable transducer, no danger to

persons or damage to the system or operating facilities occurs. Do not directly connect with on board supply system

but with a DC/DC converter which is released by automotive standardization group.

Personnel qualification



Installation and assembly of this product may be performed only by a person qualified in electronics and precision

mechanics.

Maintenance



The cable transducer is maintenance-free and must not be opened up nor mechanically or electronically modified.



Opening up the cable transducer can lead to injury caused by the spring..

Disposal



The cable transducer contains electronic components. At its disposal, local environmental guidelines must be

followed.

Assembly



Fit cable transducer on a plain base to avoid excessive force on housing.



Make sure that drainage holes are free.



It is recommended to use flat washers.

Supplementary information



The present manual is intended as a supplement to already existing documentation (e.g. catalogues, data sheets or

mounting instructions).

Baumer_GCA5_CANopen_MA_EN_V1_02.docx

28.09.2016

5/16

Baumer Electric AG

Frauenfeld, Switzerland