Baumer DTD 3 A 4 KA Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 12
Taşınabilir Jeneratör Baumer DTD 3 A 4 KA için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Baumer DTD 3 A 4 KA 17 sayfaları. Direct current/alternating current/three-phase current, tachogenerator 2-piece bearingless
Sayfayı Yazdır
4. Put on the housing, the rotor connection may be in any position.
5. Secure the housing using the four M4 screws.
• Note: Observe the tightening torques of the mounting screws.
• Important! All screws need to be secured!
6.
Electrical connection
6.1. Safety instructions for electrical connection
• Warning! Observe the additional safety precautions in chapter 4.
• Warning! Danger of electric shock!
Make sure tachogenerator is not live for the time of electrical commissio-
ning!
Switch off power supply of any equipment involved!
6.2. Electrical commissioning
• Remove terminal box cover with the „Thalheim" label.
• Insert the connecting cable into gland PG7.
• Execute terminal assignment.
• Only use cables recommended by Baumer.
Type
TD 3 A 4 KA (DC)
WTD 3 A 4 KA (AC)
DTD 3 A 4 KA (three-phase current)
• Tighten Pg7 gland at the terminal box cover.
• Put on the terminal box cover.
Note: the terminal box can be shifted by 180°.
7.
Maintenance, repair & disposal
• Any repair work or opening of the tachogenerator by the manufacturer only.
• Dispose of all integrated components in compliance with the country-specific
provisions.
12
Terminal assignment
Marked + and -
Marked + and -
1 = L1
3 = L3
2 = L2
4 = MP
Baumer_TD3A4KA_OI_DE-EN_1606.indd