Asus AP2000 Donanım Referans Kılavuzu - Sayfa 31

Sunucu Asus AP2000 için çevrimiçi göz atın veya pdf Donanım Referans Kılavuzu indirin. Asus AP2000 40 sayfaları. Dual pentium® ii department server

II. System Components

Proper IDE device operation requires that the IDE ribbon cable does not

exceed 18 inches. If only one IDE device is used, connect it to the end of the

cable. Remove unused cables from the motherboard's IDE connector to

ensure proper signal strength.

The CD-ROM disk drive mounts only in one of the three fixed device bays

and requires signal and power connections like that of IDE hard disk drives.

The power and signal cable is straightforward with connectors designed to

only fit correctly. The red stripe of the signal and power cables should face

each other.

CD audio

output

CD-ROM drive connections

AP2000 Hardware Reference Guide

NOTE:

A CD-ROM audio cable is

also provided in case you install an au-

dio card. The only function of the audio

cable is to direct music CD audio sig-

nal to your audio card. Computer CD-

ROMs have data (such as *.wav,

*.mpg, *.avi) that travels through the

signal cable.

Red stripe of signal cable

Red stripe of power cable