Baumer SXC21c Kullanıcı Kılavuzu - Sayfa 14

Dijital Kamera Baumer SXC21c için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Baumer SXC21c 48 sayfaları. Sxc series cameralink cameras with truesense imaging sensors
Ayrıca Baumer SXC21c için: Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Baumer SXC21c Kullanıcı Kılavuzu
Timings:
A - exposure time
frame (n) effective
B - image parameters
frame (n) effective
C - exposure time
frame (n+1) effective
D - image parameters
frame (n+1) effective
E - earliest possible trigger
Image parameters:
Offset
Gain
Mode
Partial Scan
14

6.2.2. Trigger Mode

After a specified external event (trigger) has occurred, image acquisition is started. De-
pending on the interval of triggers used, the camera operates non-overlapped or over-
lapped in this mode.
With regard to timings in the trigger mode, the following basic formulas need to be taken
into consideration:
Case
t
< t
exposure
readout
t
> t
exposure
readout
6.2.2.1. Overlapped Operation: t
In overlapped operation attention should be paid to the time interval where the camera is
unable to process occuring trigger signals (t
exposures. When this process time t
external events again.
After t
 has elapsed, the timing of (E) depends on the readout time of the current im-
notready
age (t
) and exposure time of the next image (t
readout(n)
formulas mentioned above (no. 1 or 3, as is the case).
In case of identical exposure times, t
tion.
Trigger
t
t
Exposure
Readout
TriggerReady
Flash
(1)
t
earliestpossibletrigger(n+1)
(2)
t
= t
notready(n+1)
exposure(n)
(3)
t
earliestpossibletrigger(n+1)
(4)
t
= t
notready(n+1)
exposure(n)
exposure(n+2)
). This interval is situated between two 
notready
has elapsed, the camera is able to react to
notready
exposure(n+1)
remains the same from acquisition to acquisi-
notready
t
min
triggerdelay
t
exposure(n)
exposure(n+1)
t
readout(n)
t
notready
t
t
flash(n)
flash(n+1)
t
flashdelay
Formula
= t
- t
readout(n)
exposure(n+1)
+ t
- t
readout(n)
exposure(n+1)
= t
exposure(n)
= t
exposure(n+1)
). It can be determined by the 
t
readout(n+1)