Amphenol AMPHE-EX L-2124 Montaj Talimatları Kılavuzu - Sayfa 9

Kablolar ve konektörler Amphenol AMPHE-EX L-2124 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Amphenol AMPHE-EX L-2124 17 sayfaları.

Sayfayı Yazdır

CAUTION: WHEN INSERTING OR REMOVING CONTACTS, DO NOT SPREAD OR ROTATE

TOOL TIPS.

IV.

Removal:

Slip correct sized tool (with plastic tool, use white end) over wire insulation and slide forward on

wire until tool tip enters rear grommet and comes to a positive stop on contact shoulder. Grip wire,

and simultaneously remove tool, contact and wire. (On occasion, it may be necessary to remove

tool, rotate 90° and reinsert).

Unwired Contacts: Remove sealing plugs. Standard Removal Tools: Using applicable removal

tool, insert and carefully work tool tips over wire well. When tips bottom, contact will release

from internal retention clip. Push contact from connector front face out connector rear with round

ended non-metallic rod. Rod will follow contact. (See Tool Table 3 for applicable removal tool

and correct rod diameter). Unwired Removal Tool (11-10050-XX): Removal procedure is same as

with standard tools with the exception that tool will withdraw contact without pushing from front.

Push plunger to remove contact from tool. (See Tool Table, in catalog, for correct size).

Page 9 of 17