Baumer NE215 Kullanım Talimatları Kılavuzu - Sayfa 35
Kasa Sayacı Baumer NE215 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Baumer NE215 40 sayfaları. Electronic preselection counter
Sayfayı Yazdır
Supplement
Address for printer:
- the number of stop bit
The contacts 21(-T,R) and 22(+T,R) are assigned to the open RS485-type
interface.
9. Supplement to the scaling factor manual
(May 1999)
This supplementary manual is describing the modification of the
counter's operation manual regarding application of the scaling factor
and the alibi printer SP 298 of the company Star. It is according to the
third addendum of licence No. 1.62-3251.11 file number 5.23-99037480
dated 24.06.1999.
DATAMEGA Mikrodatentechnik GmbH
Landsberger Str. 318-320
80687 München
Tel.: 089/56017-300
9.1 Modifications in Chapter 2: „Get to know the counter"
The counter consist of
- preset counter with 2 presets (PTB-approved) and scaling factor
- batch counter with preset and multiplier
- totalizer, (PTB-approved) with scaling factor
- hour counter
The device is approved by the German Physical-Technical Authorities
(PTB) for calibration. The PTB-approved register system provides a
printer model Star SP298 with serial interface RS232.
Printer DIP switch settings (for counters with closed interface):
Schalter
1
2
Off
On
Baudrate:
4800 Bit/s
The settings correspond to the counter default parameters in pro-
gramming lines 43 and 44. Upon any modifications the DIP switch
settings have to be adapted correspondingly.
Printer DIP switch settings (for counters with closed and open
interface):
Schalter
1
2
Off
On
Baudrate:
4800 Bit/s
These settings are always valed since they cannot be altered in any
way at the counter.
3
4
Off
Off
7 Datenbits
gerade Parität
3
4
Off
On
7 Datenbits
keine Parität
NE215
5
6
7
Off
Off
On
Xon/Xoff
2K Puffer
5
6
7
Off
Off
On
Xon/Xoff
2K Puffer
35