Amphenol RESMLAC 28 MG Kurulum Kılavuzu - Sayfa 4

Anahtar Amphenol RESMLAC 28 MG için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Amphenol RESMLAC 28 MG 15 sayfaları. Ip67 rugged ethernet managed switch
Ayrıca Amphenol RESMLAC 28 MG için: Kurulum Kılavuzu (15 sayfalar)

Sayfayı Yazdır
Amphenol RESMLAC 28 MG Kurulum Kılavuzu
Section 2
Overview
The switches can be mounted directly to a flat surface or to a wall. Refer to the mechanical
drawing below. Its high protected enclosure makes it able to withstand immersion (IP67
rating).
The Ethernet connections come out from rugged MIL-DTL-38999 serie III connectors for
power and fiber and with SCE Terrapin connectors for Ethernet.
Front Panel
The following describes the front panel, and LED indicators of the RESMLAC28MG.
Display
The Single Power 1 and Power 2 Led indicators on the front panel provide the operative
LED Indicators
status of the switch. Some models come with only 1 power supply, some come with 2
for Power
separate power supplies.
On models with only 1 power supply, only Power 1 LED indicator will be operational.
Once the LED is turned on, the switch is powered and ready-for-use.
This LED will be ON solid green when proper power has been applied to the unit.
Each port has 2 LEDs indicators:
LED indicators
for Ethernet
ports
RESMLAC 28MG IG rev. 1.1
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Hardware
Link / Activity (Off – there is no link, Steady Green – There is a device connected,
Flashing Green – there is data transmission)
Speed (Steady Green for 1000Mbps, Off for 100 and 10 Mbps)
Page 4 of 14
Last Rev: 28-Nov-11