Amphenol RJSBKN9010-8US1-DG90 Kullanıcı Kılavuzu - Sayfa 7

Anahtar Amphenol RJSBKN9010-8US1-DG90 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amphenol RJSBKN9010-8US1-DG90 14 sayfaları. Rj-switch rjs series ip65/68 rugged military ethernet unmanaged switch

Sayfayı Yazdır

Backshells

Switch

Plug size

model

All models

9 (A)

1. Prepare the cable for termination process and slide

onto the cable the items in the order shown on figure 1.

2. Screw the backshell at the rear of the connector.

3. Fold back the braid on the outer jacket and fix it

(figure 2).

4. Install the braid as shown on figures 3 and 4:

Release the braid and cover the backshell (a) and the

connector's shell. Slide the first ring (b) over the braid.

Fold back the braid on the ring (b) and slide the second

ring (c) over the braid and the first ring (b). Screw the

last ring (d) at the rear of the backshell. If necessary, fix

the extra braid on the outer jacket of the cable. If this

installation (double folding of the braid) is not possible,

refer to figure 5: Slide the first ring (b).

Release the braid and cover the backshell (a) and the

connector's shell. Cut the braid as shown. Slide the

second ring (c) over the braid and the first ring (b).

Screw the last ring at the rear of the backshell.

5. Install the heat-shrink molded piece.

RJSML8UG1 Unmanaged Switch UM

Amphenol

– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com

We suggest using TVNSA backshells with corresponding heat shrinks. See previous page

for part numbers.

These backshells, providing an electrical continuity between cable and connector, ensure a

high level or of EMI/RFI protection. The sealing is ensured by straight heat shrink molded

piece at the rear of the backshell. NSA and SA backshells ensure the shielding by clamping

the braid with a screwing system. The free inner ring avoids twisting of the braid during

screwing.

Heat-shrinks are molded pieces for harsh environment, fluid resistant (with preinstalled

adhesive).

TVNSA backshell dimensions

A length

mm (in)

35.60

(1.402)

TVNSA backshell assembly instruction

A thread

B max

Metric

mm (in)

16.70

M12x1.0

-6H

(0.658)

Page 7 of 13

C max

Ø E max

mm (in)

6.90

15.62

(0.272)

(0.615)

Last Rev: 24-Sep-14

Ø G max

mm (in)

16.50

(0.650)