Amphenol Tempsonics Level Plus LLE Kullanım Kılavuzu - Sayfa 6

Verici Amphenol Tempsonics Level Plus LLE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Amphenol Tempsonics Level Plus LLE 20 sayfaları. Magnetostrictive liquid level transmitters with temposonics technology

Sayfayı Yazdır

Level Plus

LLE

Operation Manual

4.3 Installation, commissioning and operation

The liquid level transmitter should be used only in technically safe

conditions. To maintain this condition and to ensure safe operation,

installation, connection and service, work may be performed only by

qualified technical personnel.

If danger of injury to persons or of damage to operating equipment

could be caused by sensor failure or malfunction, additional safety

measures should be included in the overall automation solution. In

the event of trouble, shut down the sensor and protect it against

accidental operation.

1. Wear proper personal protection equipment such as hard hat,

safety shoes, safety glasses, gloves, and hearing protection.

2. Do not open or dismantle the sensor.

3. Follow the specifications given in the technical documentation.

4. Two (2) individuals are recommended to conduct proper

installation, commissioning, and repair of the level transmitter.

5. Protect the sensor against mechanical damage during installation

and operation.

6. Do not use damaged products and secure them against

unintentional use. Mark damaged products as being defective.

7. Connect the sensor very carefully and pay attention to the

polarity of connections. Temposonics recommends to not make

connections while power is live.

8. Before turning on power, ensure that nobody's safety is

jeopardized by starting level transmitter and/or process.

9. Regularly follow preventative maintenance to prevent safety risks

10. Make sure that no wire strands are loose or sticking out of

the terminal block connection which could short and cause a

problem.