Asus ZenFone Go ZB500KG Kullanıcı Kılavuzu - Sayfa 10

Cep Telefonu Asus ZenFone Go ZB500KG için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Asus ZenFone Go ZB500KG 23 sayfaları.

RF Exposure Information (SAR)

This phone is designed and manufactured not

to exceed the emission limits for exposure to

radio frequency (RF) energy set by the Federal

Communications Commission of the United States.

During SAR testing, this device was set to

transmit at its highest certified power level in all

tested frequency bands, and placed in positions

that simulate RF exposure in usage against the

head with no separation, and near the body with

the separation of 10 mm. Although the SAR is

determined at the highest certified power level, the

actual SAR level of the device while operating can

be well below the maximum value. This is because

the phone is designed to operate at multiple power

levels so as to use only the power required to reach

the network. In general, the closer you are to a

wireless base station antenna, the lower the power

output.

The exposure standard for wireless devices

employing a unit of measurement is known as the

Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W/kg.

This device is complied with SAR for general

population /uncontrolled exposure limits in

ANSI/IEEE C95.1-1992 and had been tested in

accordance with the measurement methods and

procedures specified in IEEE1528.

The FCC has granted an Equipment Authorization

for this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF

exposure guidelines. SAR information on this model

phone is on file with the FCC and can be found

under the Display Grant section of www.fcc.gov/oet/

ea/fccid after searching on FCC ID: MSQX00BD.

For this device, the highest reported SAR value for

usage against the head is 0.78 W/kg, for usage near

the body is 1.15 W/kg.

E11709_ZB500KG_UM_Booklet_EU.indd 10

2016-09-12 09:58:59