Dahua VTO2202F-P Hızlı Kurulum Kılavuzu - Sayfa 4

İnterkom sistemi Dahua VTO2202F-P için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Dahua VTO2202F-P 12 sayfaları. 2mp single outdoor station camera

Sayfayı Yazdır

1. Check the box next to the VTO to be initialised.

3. Enter the new password to be used for the VTO

and an email address for password recovery. Set

P/N to P and click next to continue.

5. After a few seconds the tool should show that the

VTO was successfully initialised. Click Finish to end

the process.

Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com

2. Click the initialise button to start the initialise process.

4. Check or Uncheck Online update options. A direct

internet connection is required for these features.

6. The VTO will now show in the Conﬁ g Tool in an

initialised state. It is now possible to program the

VTO IP address and other settings. You must ensure

the password is modiﬁ ed to the initialised password

of the VTO within the search setting, located at the

top of the conﬁ g tool.