AMPHIBICO HD Wave WAVH0760 Kullanım Kılavuzu - Sayfa 2

Kamera Aksesuarları AMPHIBICO HD Wave WAVH0760 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AMPHIBICO HD Wave WAVH0760 10 sayfaları. Amphibico wave housing (for the sony hdr-cx/pj 710, 730, 740 & 760 camcorders)

Sayfayı Yazdır

FOREWORD

Thank you for having selected the AMPHIBICO Digital HD Video Housing System for your underwater videography.

The AMPHIBICO Digital HD Video Housing is the result of a long and continuing relationship with the most demanding

underwa¬ter videographers in the world. Each housing is handcrafted, quality checked and pressure tested to a 300 feet

equivalent by a small group of specially trained individuals, each of whom takes the utmost pride and satisfaction in offering

the best underwater video housing in the world.

The AMPHIBICO Digital HD Video Housing was designed for optimum technical and optical performance and to provide

easy and efficient underwater access to essential functions and controls of the Sony CX/PJ 710, 730, 740 & 760 camcorders.

This manual assumes that the user is already familiar with the Sony camcorder. If not, please read the Sony instruction

manual before attempting to use the housing.

With basic care and maintenance, your AMPHIBICO housing will give you a lifetime of enjoyment and satisfaction in

pro-ducing underwater imaging.

Please read this manual carefully before using your housing for the first time and note that: wherever cited the right hand

is your right when using the housing.

SAFETY PRECAUTIONS:

Improper transportation handling or use of this housing might cause a flood or malfunction.

Please read and follow the following precautions:

• Store and transport the housing in a sturdy, shock proof container and avoid travelling with the camcorder mounted

inside the housing as impact forces especially on the external push buttons will be transferred to the camera.

• When travelling by air, either remove the port or open the housing.

• Never change a port or open the housing in a location where sand or similar foreign material might come in contact with

an O-ring.

• Use of accessories or modifications and alterations unauthorized by the manufacturer may result in flooding or poor

functioning of the controls.

• Be careful when opening the housing as the pressure build-up inside the housing will exaggerate the force of the latch

spring. Keep fingers away from the path of the latches.

• Whenever changing ports or O-rings, perform a simple seal test without the camcorder inside.

• Avoid scratching the acrylic or glass ports and windows.

• Make sure that all ports remain properly attached before rinsing the housing,

• The main O-ring seals should be maintained and cleaned on a regular basis. Read and follow the Care and Maintenance

section on this manual.

• Ensure that the spring loaded secondary lock is properly engaged on the latches to prevent their accidental opening.

Page 1