COMBA CPBBUV2-48100-UL Hızlı Kurulum Kılavuzu - Sayfa 6
Konferans Sistemi COMBA CPBBUV2-48100-UL için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. COMBA CPBBUV2-48100-UL 10 sayfaları. Annunciator panel
Ayrıca COMBA CPBBUV2-48100-UL için: Hızlı Kurulum Kılavuzu (11 sayfalar)
Sayfayı Yazdır
configured as well – typically, this would be used to monitor the annunciator panel or cable integrity
between the BBU and the annunciator panel (as a communication fault alarm). This can also be set to
trigger on an over temperature alarm. This is software configurable.
Software Configurations
Log into the Battery Backup Unit (follow the BBU QIG for instructions) and turn on BBU to AP
communication. Select "1" under the "Panel NO." then click "Modify" so the Current Value shows "1".
"2" annunciator panels per BBU is currently not supported.
On the "Panel" Page:
Dev Info: This shows the device information, including device temperature, firmware version and the
serial number.
©2021 Comba Telecom. All Rights Reserved.
568 Gibraltar Drive, Milpitas, CA 95035 | +1 866 802 7961 |
www.combausa.com
6
Version 1.0.0
1.18.21